Eagle Talon and Mitsubishi Eclipse directions 

Remove the shift knob by turning counterclockwise until it is free. Remove both sides of the console by removing the screws on the sides. Remove the 4 screws holding the mounting plate in place. Once the plate is loose, remove the boot from the clips on the plate. Pull the boot up over the shift knob, turning it inside out as you go. Remove the zip tie located on the rubber collar around the shift lever. There may also be glue around the collar.

Use the zip tie included with the boot to fasten the boot to the collar. Be sure to get it positioned correctly before pulling the zip tie tight. It can be hard to move after you have the tie tightened. Reverse the above procedure to reinstall.